Why Your Linksys WiFi Extender Keeps Disconnecting and How to Fix Linksys RE6500 Keeps Disconnecting Issue

You have a Linksys WiFi Range Extender, but it keeps disconnecting. This is frustrating because you bought the extender to boost your WiFi signal, but now you can’t even use it.

There are many potential causes for this problem, but don’t worry! This guide will teach you how to fix your Linksys RE6500 so that it stops disconnecting and works properly. By following the steps in this guide, you will be able to fix your Linksys WiFi Range Extender and get it working properly again.

Why does my Linksys WiFi extender keep disconnecting?

Linksys WiFi extenders can occasionally disconnect due to wireless interference from other WiFi devices, improper placement of the extender, connection to the wrong WiFi network, or a number of other factors. For example, if the channel you are using is overlapped with other signals, or if there are too many electronic devices near the extender, this can cause it to disconnect.

To prevent this from happening, it is important to place the extender as far away as possible from other devices and to make sure it is connected to the correct WiFi network. Additionally, it is recommended to place the extender on a higher shelf to ensure it is able to properly catch signals from the router and broadcast them to connected devices without any interference.

What causes the Linksys WiFi Extender to keep disconnecting?

The Linksys WiFi Extender can keep disconnecting due to a number of reasons, such as interference from other WiFi devices, improper placement of the extender, connection to the wrong WiFi network, outdated firmware, hardware failure, loose or wrong cable connections, connection to the wrong WiFi network, and model specific issues. As a result, users may experience difficulty in getting a stable internet connection or even complete disconnection from the internet.

How to Stop Linksys WiFi From Disconnecting Frequently?

Reboot You Network Devices

Rebooting the network devices, such as the Linksys extender, router, and modem can help stop Linksys WiFi from disconnecting frequently. The process involves unplugging all the devices, waiting for 30 seconds to one minute, and then plugging them in again in the order of the cable modem, router, and extender.

This power cycle can be especially helpful when the router is old or not functioning well. Additionally, updating the firmware and resetting the router can improve security, compatibility, and performance. By taking these steps, users may be able to resolve the issue of their Linksys WiFi disconnecting.

Move the Extender Closer to Router

If your Linksys extender is not in range of your router, the internet will keep disconnecting. To stop your Linksys WiFi from disconnecting frequently, you can move the extender closer to the router to establish a strong connection.

Step-by-Step Instructions:

1. Check the location of the Linksys extender and make sure it is within range of your router.
2. Move the extender closer to the router, if necessary.
3. Make sure there are no physical obstructions or WiFi interference-causing devices blocking the signal between the extender and router.
4. Avoid placing the extender near any other electronic devices that could interfere with its signal, such as microwaves, refrigerators, cell phones, baby monitors, Bluetooth devices, etc.
5. Place the extender on a higher shelf, if possible, so that it can properly catch signals from your existing router and broadcast them to your connected devices.
6. Once the extender is in place, reboot the router and extender to ensure the connection is properly established.

Update Your Linksys

Updating the firmware of your Linksys extender can help prevent your WiFi connection from disconnecting frequently. This is because outdated firmware can lead to internet dropping issues and reduce WiFi interference.

Updating the firmware can help to customize the WiFi settings of the router, reduce the frequency interference from other WiFi devices, and improve the signal quality received from your router.

Additionally, it is also recommended to change the WiFi name (SSID) of the router and enable its WiFi security in order to reduce any possible conflicts with other routers within your network range.

Avoid Physical Obstructions and Interference

There are a few ways to avoid physical obstructions and interference that could cause Linksys WiFi to disconnect frequently. Firstly, make sure to place your Linksys RE6500 extender far from any devices that could cause interference such as microwaves, refrigerators, cellular phones, baby monitors, Bluetooth devices, etc.

Additionally, consider placing your WiFi device on a higher shelf to ensure it can properly catch signals from your existing router and broadcast them to your connected devices without any hindrance. Lastly, it is important to understand the different types of interference that could be happening on the 2.4 GHz frequency that your router uses.

This includes other wireless networks, Bluetooth devices, RADAR activities, and microwave ovens which can overcrowd the frequency band and possibly leave no room for your device. To avoid overcrowding, try turning off the unnecessary devices or switch to the 5GHz frequency, which is less crowded.

Change the Wireless Channel

Changing the wireless channel can help stop Linksys WiFi from disconnecting frequently. To do this, you need to connect to the router’s IP address, which can be found by googling your router model IP address. Once in the settings, you can try changing channels and finding which channel has the best connection.

It is recommended to change the settings such as SSID and password of your router before changing channels. It is best to choose a channel that is not congested, and the best options are channels 1, 6, and 11. Additionally, devices and appliances that use the same 2.4 GHz frequency as your router can interfere with your Wi-Fi connection.

What are the solutions to fix the Linksys RE6500 keeps disconnecting issue?

1. Update the firmware and router software

Updating the firmware and router software can help fix the Linksys RE6500 keeping disconnecting issue by reducing the WiFi interference, customizing the WiFi settings of the router, and improving the signal quality received from the router.

Outdated firmware versions of the router and extender can cause the internet dropping issue, so it is important to update them regularly. This can be done by going to the router’s control panel on a browser or using its companion mobile app (if it has one). If the router is too old, it may not be able to receive updates from the manufacturer, so it is necessary to consider buying a new one.

Updating the driver software of the extender is also necessary to improve performance, and this can be done by checking the instruction manual that accompanied the device and finding the URL address of a web portal for driver updates, downloading and installing the driver software, and restarting the devices.

2. Adjust the settings on the router

If your Linksys RE6500 keeps disconnecting, you can adjust the settings on the router to fix the issue. To do this, you need to access the router’s control panel on a browser or use its companion mobile app (if it has one). From there, you can change the SSID and password of the router.

Also, you can change the channel your router is on by connecting to the router’s IP address, which can be found by googling your router model’s IP address. Once in the settings, you can try changing channels and finding which channel has the best connection.

If you’re sure that your router updates itself automatically, there’s nothing you need to do. But if it doesn’t and it’s been a while since you last updated it, you should consider updating it. If you’re unable to see any available updates, it could be that your router’s too old and has stopped receiving updates from the manufacturer.

In that case, you may need to consider buying a new one. If none of these steps fix your issue, you can also try power cycling your router by unplugging it from the power outlet and waiting at least 15 seconds before plugging it back in and switching it on again.

3. Move the extender closer to the router

In order to move the Linksys RE6500 extender closer to the router and fix the dropping internet connectivity issue, one should follow the steps mentioned below:

Place the extender far away from physical obstructions and other devices that can interfere with the signals of the extender. Such devices can include microwave ovens, refrigerators, cellular phones, baby monitors, Bluetooth devices, etc.

Place the Linksys RE6500 extender on a higher shelf to ensure it can properly catch signals from the router and broadcast them to the connected devices.

Move the extender closer to the router so a strong WiFi connection can be established and the internet disconnecting issue can be prevented.

4. Make sure there is no interference from other electronic devices

To avoid interference from other electronic devices and fix the Linksys RE6500 keeps disconnecting issue, follow these steps:

• Place your Linksys RE6500 extender far from devices that can cause interference.
• Place your WiFi device on a higher shelf to catch signals from your existing router and broadcast them to your connected devices.
• Ensure that you are using the latest software for your clients.
• Pick the best setting for your particular situation and environment.
• Take some time to appreciate and understand how the technology has worked for you.

5. Disable the WPS feature on the router

If your Linksys RE6500 keeps disconnecting, you may want to consider disabling the WPS feature on your router. This can help to fix the issue. To disable the WPS feature on your router, start by unplugging the router from the power outlet and waiting at least 15 seconds.

This will give it enough time to truly power down. Then, plug the router back in and switch it on again. Once the router is on, access the router’s settings either by typing the IP address into your browser or by using the Smart Wi-Fi mobile app. Navigate to the Wireless settings page, and locate the WPS settings.

If the WPS is enabled, select the Disabled option and click Apply to save the changes. That’s it! You have successfully disabled the WPS feature on your router, which should help to fix the Linksys RE6500 keeps disconnecting issue.

6. Ensure that your devices are running the latest version of the software

In order to ensure that your devices are running the latest version of software to help with the Linksys RE6500 keeps disconnecting issue, you need to update the firmware of your devices. Here are the steps you should take:

Check the instruction manual that accompanied the device and look for the URL address of a web portal for driver updates. You can also usually find this information via a quick Google search.

Download and install the driver software. Make sure to restart your devices once the driver software has been successfully installed.

If your router does not automatically update itself, update it by going to the router’s control panel on a browser or using its companion mobile app (if it has one).

If you cannot see any available updates and suspect that your router’s too old and has stopped receiving updates from the manufacturer, consider buying a new one.

Update the firmware version of your device by contacting our expert technicians.

Check the client. Is it physically intact? If you have dropped it, that could have caused some hardware parts not to function correctly, and the Wi-Fi adapter might be among those.

Make sure you haven’t turned off the Wi-Fi (Airplane mode) or manually set its Wi-Fi to work in a certain way — leave the settings at default unless you know what you’re doing.

Check that all phone cases are not adversely affecting wireless reception.

Upgrade your computer to the latest version of macOS and also the latest of whatever is offered via Mac Software Update.

On a Windows computer, navigate to the hardware component in question. In this case, it’s one of the Network adapters. Pick the Wi-Fi adapter, and double-click on it to bring up the Properties window of that device.

On the Properties window, click on the Driver tab to look at the Driver Date value. If it is before 2019, it’s too old, and you want to try updating the driver. To do that, click on the Update Driver button, then on Search automatically for updated driver software.

7. Change the wireless network name and password

If your Linksys RE6500 router keeps disconnecting and you want to try fixing it, changing the wireless network name and password is a good place to start.

8. Use a router with an external antenna to increase the WiFi range

If you are looking for a way to extend the range of your WiFi network, one of the most effective ways to do so is to use an external antenna. Installing an external antenna to your router can significantly increase its range and improve its performance.

Wi-Fi dropping, frequent disconnections, and failure to connect: The general causes and fix

Hardware incompatibility

Examples of hardware incompatibility causing Wi-Fi dropping, frequent disconnections, and failure to connect include inadequate data packages, outdated clients and software drivers, physical damage to the client, protective cases adversely affecting wireless reception, and incompatible hardware components.

Inadequate data packages can cause Wi-Fi issues, as they can limit the amount of data that can be transferred and received. This can lead to a slower connection, frequent disconnections, and even difficulty connecting in the first place.

Outdated clients and software drivers can also lead to Wi-Fi connectivity issues. The latest Wi-Fi driver should always be installed, as it allows the hardware component to work with the operating system. For example, on a Windows computer, you can check the driver of the Wi-Fi adapter the same way you do any other hardware components and update it if necessary.

Physical damage to the client can also lead to Wi-Fi issues. If the device has been dropped or physically damaged, it can cause certain hardware parts not to function correctly, including the Wi-Fi adapter.

Protective cases on phones and tablets can also lead to Wi-Fi issues. Even though all cases interfere with wireless reception, the thicker the case is, the worse it gets.

Finally, incompatible hardware components can lead to Wi-Fi issues. As there are so many hardware vendors with many different devices and different Wi-Fi standards and tiers, it can be difficult to keep these components interoperating well in all scenarios.

Signal saturation or interferences

Signal saturation or interference is a common issue that can lead to Wi-Fi dropping, frequent disconnections, and failure to connect. There are a variety of causes of signal saturation or interference, ranging from the physical environment to the hardware and other devices in use.

One of the most common causes of signal saturation or interference is the physical environment in which the router is located. Urban environments often have more Wi-Fi broadcasters than rural areas, which can lead to signal interference and saturation. Additionally, thick walls or materials which block radio waves can interfere with signal strength.

To fix signal saturation or interference, there are a few steps that can be taken. First, it is important to set realistic expectations for Wi-Fi signal strength and speed. Wi-Fi is never as fast as the vendor claims and always fluctuates in speed.

Additionally, it is important to try to understand the nature of radio waves and their behavior. Visualizing radio waves as ripples in a still pond can help to better understand how they interact and how different elements, such as other devices in the area, can interfere with them.

Finally, it is important to turn off any devices or appliances that might be using the same 2.4GHz frequency as the router. Doing so can help reduce the overcrowding of the frequency band and restore the Wi-Fi connection.

FAQs

Where should I place my Linksys WiFi Extender for optimal performance?

For optimal performance, your Linksys WiFi extender should be placed away from any devices that could cause interference, such as microwave ovens, refrigerators, cellular phones, baby monitors, and Bluetooth devices. Additionally, place the extender on a higher shelf so that it can properly catch signals from your existing router and then broadcast them to your connected devices.

If there are any physical obstructions or WiFi interference-causing devices close to your extender or router, move them away. You may also need to change the wireless channel of your extender. Generally, channels 1, 6, or 11 are considered to be the best options. Make sure to choose a channel that is not congested to avoid compatibility issues.

Is it necessary to update the firmware of my Linksys WiFi Extender?

Yes, it is necessary to update the firmware of your Linksys WiFi Extender. An outdated firmware version of your extender, as well as a router, can cause internet-dropping issues. Updating the firmware can help you enjoy additional features and ensure that you are taking advantage of the features already available in the WiFi version. Additionally, updating the firmware can help mitigate the internet dropping issue that your Linksys RE6500 may be experiencing.

Why is my Linksys RE6500 WiFi Range Extender disconnecting so frequently?

Having trouble with your Linksys RE6500 WiFi Range Extender disconnecting frequently? There are several potential causes that could be the culprit, such as having insufficient WiFi signal, experiencing WiFi interference, overloading your WiFi network with too many connected devices, and having outdated firmware versions on the extender and router.

Why does My Linksys Velop Keep Disconnecting?

What causes My Linksys Velop to disconnect? There could be a number of possible reasons why a Linksys Velop keeps disconnecting, such as frequency interference from other Wifi devices, improper placement of the Linksys wifi extender, connection to the wrong Wifi network, overloading of the WiFi network, etc. To solve this issue, one should reduce wifi interference, reposition the Linksys wifi extender, update the firmware of your router, power cycle your Wifi extender properly, or reset the router, etc.