You’re trying to extend your WiFi signal, but your TP-Link range extender isn’t working. This can be frustrating, especially if you’re not sure what the problem is.
There are a few things that could be causing your TP-Link range extender to not work properly. By checking the signal strength and internet connection, rebooting the device, and updating the firmware, you should be able to get your range extender working again.
In this guide, we’ll walk you through how to fix your TP-Link range extender not working. By following these steps, you should be able to get your WiFi signal up and running again in no time.
Why does your TP-Link range extender not work?
The possible causes of a non-working TP-Link range extender can include weak signal reception, an issue with the internet connection, outdated or corrupt firmware, or a need for a reboot. Weak signal reception can be caused by placing the range extender too far from the main router.
An issue with the internet connection can be caused by the main router not getting an internet connection from the ISP or the connection speed being too slow. An outdated or corrupt firmware can prevent the extender from working properly, and a need for a reboot can be due to the extender not responding correctly.
How to fix a TP-Link range extender that is not working?
Check The Internet Connectivity
If your TP-Link range extender is not working, the first thing you should check is the internet connectivity. Make sure that the extender is properly connected to your router and that there is an active internet connection. If the extender is not connected to the router, it will not be able to connect to the internet and will not work properly.
You can check the connection by looking at the lights on the extender. If the light is green, it means that the connection is good. If the light is red or amber, it means that there is a problem with the connection.
Update The TP-Link Extender Firmware
You can Update the firmware on the TP-Link app by going to Tools > System > Firmware Update > Update or you can download the latest firmware file from the TP-Link Download Center first. (You’ll need to select your model number and it will direct you to the download page
Reboot Your TP-Link Range Extender
If your TPLink range extender is not working, you can reboot it to resolve the issue. Here is the step-by-step guide to rebooting the TP-Link WiFi Range Extender:
- Disconnect the TP-Link WiFi Extender from the wall outlet for a minimum of 5-10 minutes.
- Plug the TP-Link WiFi Extender back and turn it on.
- Connect your devices to the TP-Link network.
- If the problem is still not resolved, you can try resetting the TP-Link WiFi Extender.
Perform a Hard Reset on TPLink Range Extender
A hard reset is a great way to troubleshoot and resolve any issue with your TP-Link Wi-Fi Range Extender. To perform a hard reset, you need to locate the reset button on your TP-Link range extender. Then, use a sharp and pointed object to press and hold the reset button for 2-3 seconds.
After that, release the reset button and let the device reboot automatically. Once the reset process is finished, the device should be back to its normal state.
Contact TP-Link Customer Service
If you are having trouble connecting to your TP-Link range extender or it is not working properly, you can contact TP-Link customer service for assistance. Here is a step-by-step guide on how to contact TP-Link customer service:
- Go to the TP-Link website and search for the customer service page.
- On the customer service page, you will find different options to contact TP-Link customer services, such as live chat, email, phone, and other support options.
- Select the most convenient option for you and provide the required details asked.
- Explain the issue you are facing with the TP-Link range extender.
- You will receive a response from the customer service representative who will try to resolve the issue or provide solutions to fix the problem.
What to Do When TP-Link AC750 WiFi Extender Is Not Working
Check the Signal Strength & Internet Connection
If your TP-Link AC750 WiFi Extender is not working, the first thing you should do is check the signal strength of your home’s wireless network. If the signal strength is weak, it may be the reason why your extender is not working. Another thing to check is your Internet connection. If you are connected to the Internet but the signal strength is still weak, you may need to:
- Check the status at the bottom of the global icon. If it is abnormal or no internet, you should decrease the distance between the extender and your router or change the channel.
- Check if there is any interference in the way of the two devices. If there is, remove it.
- Connect your computer to your main router with an Ethernet cable or Wi-Fi, then check the IP info of your computer.
- Log into your router and check your WiFi settings. Ensure you are in the correct wireless mode.
- Position your access points, routers, and receiving antennas as high up off the floor as possible.
- Check the physical alignment of your WiFi antennas. Make sure it is pointing towards the ceiling of your home or office for the best performance.
- Connect the extender to your router either via WiFi signals or ethernet cable.
- Check the device list in your router’s wireless settings to see if your extender is connected.
- Use a WiFi booster to extend the signal strength if your wireless internet is stretched to the maximum extent of its range.
Reboot TP-Link Extender
If your TP-Link AC750 WiFi Extender is not working, you may need to reboot the device. Rebooting the extender is a simple process, though you should also try other troubleshooting steps first. To reboot the device, simply unplug it from the wall outlet for 5-10 minutes, and then plug it back in.
You should also check that the correct password is entered in the network settings area, and if necessary, you can update the firmware to improve signal strength.
Update Your Range Extender’s Firmware
Updating the firmware of a range extender can help solve the problem with a TP-Link AC750 WiFi Extender by improving the device’s performance, fixing any lingering software bugs, and providing the latest security and safety updates.
By having the latest firmware, users are guaranteed an optimized connection, improved signal strength, and more reliable performance. Additionally, it can prevent malicious code from infiltrating the extender, since they will be running the latest security protocols.
Updating the firmware can also provide the best possible connection quality and data rates, allowing users to enjoy their online activities without any interruption.
Reset Your TP-Link WiFi Extender
To reset, locate the reset button on the device and press it for 2-3 seconds. After a few seconds, release the button and the extender should automatically reset and reboot. Another method you can try is configuring the TP-Link extender WPS.
To do this, plug the extender into a power outlet near the main router, then press the WPS button on the main router and the extender. Wait for two minutes and check the wireless LED light signals of your extender. If they are still off, try placing the extender in a new location.
Finally, if none of these methods have worked, you can always reboot your extender by unplugging it from the wall socket for 5-10 minutes and plugging it back in. Hopefully, these step-by-step instructions will help you reset your TP-Link WiFi Extender.
How do I reset my TP-Link extender?
Resetting your TP-Link WiFi extender is a simple process and can be done in a few steps. If you are having trouble connecting your device to your router, restarting the extender could help fix the issue.
Here’s how to reset your TP-Link extender:
- Locate the reset button on the back of the extender.
- Use a sharp object such as a paper clip to press and hold the reset button for 2-3 seconds.
- Release the button and wait for your extender to reset and reboot.
Once the reset is complete, you can configure the extender using either the WPS button or the web browser. To begin, plug your extender into a power outlet and wait for the LED light to change to a solid color. Then, press the WPS button on your router, followed by the WPS button on the extender. Finally, place the extender in an area that can receive the signal from the main router.
If you have changed the TP-Link extender password before and you don’t remember it, you can reset the extender password to the default settings. To do so, you need to long-press the reset button for a few seconds with the help of a sharp object until the device starts to reboot. Once the reset is complete, the password will have been changed automatically.
By following these simple steps, you can reset your TP-Link extender and get your device working again. If you have any further issues, you can get in touch with the experts at Wifi Extender Hub for assistance.
FAQs
What is a TP Link Range Extender?
A TP Link range extender is a device designed to extend the total coverage area of your wifi connection. It receives an existing wifi signal, boosts it, and then transmits the boosted wifi signal. This is especially useful when there’s an area of your home or office that your regular router can’t reach.
The TP Link range extender comes in various models, with features such as Wi-Fi 6, AX1800 speed rating, dual-band (2.4 and 5GHz), and WPA2 wireless network security. It’s easy to set up and use and can help to ensure strong, stable connections throughout your home or office.
How do I check the WiFi signal of my TP Link Range Extender?
Launch a web browser and visit the website www.tplinkrepeater.net or http://192.168.0.254. Log in with your credentials and check the status of your extender by visiting Settings > Status. If everything looks good, congratulations! Your TPLink repeater is now connected to your router.
Is a TP Link Range Extender compatible with all routers?
Yes, a TP-Link range extender is compatible with all routers as long as the router supports both 2.4 GHz and 5 GHz frequencies. It is important to check the compatibility list prior to purchasing the device to ensure that it will work with your router.
If your router only supports the older 2.4 GHz standard, the TP-Link Extender will not be able to extend the range of your Wi-Fi signals. The TP-Link RE605X makes it easy to tweak settings via TP-Link’s Tether app on an Android or iOS device. With the help of the WPS function, setting up the TP-Link range extender is a simple and straightforward process.
Why isn’t my range extender working?
The TP-Link range extender is not working because of weak signal reception, an issue with the internet connection, outdated or corrupt firmware, or a need for a reboot. Weak signal reception can be caused by placing the range extender too far from the main router.
What’s the solution if my TP-Link range extender can’t connect to my router properly?
If your TP-Link range extender is having trouble connecting to your router, there are a few possible solutions. First, you should try placing the range extender near the main router, as it may not be receiving a strong signal. Second, you should check your internet connection.
Connect a single device to the router and access the internet connection, or use an ethernet cable to check the internet connection on your PC. If you’re not able to access the internet, contact your ISP. Last, you should consider updating the TP-Link extender firmware.
Go to the TP-Link website and download the latest firmware, then connect your computer to the TP-Link extender and navigate to the web interface to update the extender’s firmware. If none of these solutions work, you can reboot the TP-Link extender by turning it off for at least 5 minutes, then turn it back on and reconnect the devices.